Update an AMD Sempron 2800

Nebojsa laboratories reported published Advanced Micro Devices in 2004 its Sempron 2800 Celeron D processor to compete.

Since its release, AMD has changed design of 2800's order with a new generation card mother of Sockets be compatible. So the installation procedures differ depending on the type of the socket, your 2800 requires. It is important that your type which socket, determine before you buy to avoid a new processor compatibility issues. Level of difficulty: Medium difficult

Instructions

Belt of the things you need: Phillips ScrewdriverFlathead ScrewdriverGrounding

1. 1

   Visit the link in the section resources.

It leads to a free program that identifies your Board offers a Web site. Download you this program, and follow the instructions to install and run. This is a necessary step as usually not software that displays your board model.

2

Click "Processor" in the main window of the program and write your socket type in the box "Package."

This will be either socket 462 (otherwise known as "A socket") or Socket 754 according to CPU world. Then click the "Board" and notice your motherboard brand and model.

3

Navigate to your motherboard manufacturer's website and do a search for your board compatible processors.

The site does not offer a search compatibility option, contact the manufacturer instructions. Buy your Board of Directors-compatible processor.

4

Turn off your computer, drag it, and remove all cables and the périphé

America's. Screws (d)He side panel access, and then delete it. If your sidebar not screws you, your manual for instructions on how your board access.

5

Connect one end of the belt grounding on a piece of metal inside your com

Computer. The other end attach it to your wrist. Search your CPU heatsink. The large fan is connected to your motherboard.

6

Disconnect the cable from the motherboard heatsink.

If the heatsink is a lever on the one hand pull over to unlock. Separate clips on each side of the heat sink. This requires a slight pressure may down, then screwdriver to outside with a head. Socket 754 can life movie clips. If this, remove the screws.

7

Lift the heat sink, make a note of its emphasis on the socket.

Raise the lever, which in addition to the socket running. If you install a CPU socket 462, then press the lever to remove before you there.

8

Find the corner or the corners of your new processor pins missing.

Align base with missing holes with corner. The processor into the socket the rest, keep it in place and the lever to its position after below back.

9

Search on the bottom of your new heat sink thermal compound square pad.

It is usually pink or grey in colour. If there is no thermal compound, you install the heatsink. Consult the manual of your CPU, or contact the manufacturer for instructions.

10

Guide of the new heat sink in the same direction as the dissipat

EUR previous heat. Socket have 462 heat sink a slot of a lip on the Socket s,ntspricht. The recovery of the heat sink on the socket.

11

Tighten the screws if you are installing a sink screw type.

If you install a clip of the heat sink, add a clip by hand. If your heater is a lever fixing clip beside the first lever. Insert a flat head screwdriver clip and press down to what it clicks in place. If the heatsink is a lever lock, pressing its position fully down.

12

Connect the cable of the heatsink to the motherboard and r

ePlace your access panel.