Disable my microphone in Skype?

Skype, is responsible for 8% of international calls by 2010 according to their official website.

Skype's popularity is based on the perspective of accounts free video calls and its simple interface, worked with the camera microphone. If for any reason whatsoever, the microphone is muted, none is as effective as it could be. The unmuting requires some changes in the audio program on your computer or a Skype service. Difficulty: easy

Instructions

Access things need: computer with Internet

Fit the mic parameter

1

Open the window of the workstation in the "Start" menu

2

Select "Control Panel".

It is usually located on the right side of the window.

3

Open sounds and audio devices window.

The icon will be a speaker jack.

4

Select the 'Voice' tab in the menu "Properties".

This opens a window that displays the controls for playback and recording voice voice. Go to the voice recording section.

5

Select the appropriate microphone in the menu drop down.

If you have a webcam with integrated microphone, choose "Camera". A high-quality microphone would use instead you have, select the microphone. If the microphone you want is listed as an option, you should consult the manual install special drivers.

6

Press the volume under the menu voice record button.

This hoist a sliding volume setting.

7

Challenge

Make the soundtärke at an appropriate level bar. The field "Mute all" in the lower left corner should remain disabled.

8

Press the button "Test equipment" under the menu voice recording.

This is his hardware test wizard trigger.

ID = "jsArticleStep9" > 9

Click on prompts and test the microphone.

Check whether the volume is suitable and adapt by repeating step 7.

A muting - via Skype

1

Skype log.

2

Select the menu "Options".

3

Select "Audio setting" from the toolbar on the right side of the window.

Hoist the parameters for the microphone, as well as stakeholders and ring.

4

Select "Windows default device" from the microphone pop-up menu.

This ensures that the program uses the microphone and the settings that you set up in the previous section. There is also a green noise measurement must all sounds you register. If the green bar usually strikes of the Center, the microphone is a corresponding volume.

5

Select a name in the contacts list and press the green call button pressed.

Skype will start ringing and increase of a separate call screen. It is a small icon at the bottom of the screen a microphone with a slash through it. Press this button to activate the mute and un - mute of the microphone. If the microphone is always toned, consult a small message at the bottom of the screen call.