How to solve the problems of Skype VoIP

Skype works without hardware devices such as such as a phone card and therefore it is possible, problems are usually due to a network failure or PC configuration.

All Skype users have access to the official website of Skype: www.skype.com and troubleshoot online documentation. Here are a few ways to solve the problems of Skype. Difficulty: average

Instructions

1. 1

   Perform the following tasks if you don't have to connect to the network via Skype P2P (error # 1101, 1102 and 1103).

Change the settings for the Internet. If you connect over your Office, school or office network to the Internet, you may be behind a firewall. Learn more about install a firewall and configure it. Configure the firewall, the first edition of the program Skype, and then navigate to start menu and select settings, control panel. Continue to select the Windows Firewall. Disable "exceptions and exceptions allow pass." Skype in the exceptions list is listed, delete it. The Skype program after continue.

2

Verify the quality of the voice.

If you hear a low voice or poor quality of others during a call, open the Skype software tools - options - sound devices.

3

Check the field with "enable automation its adjusting device - settings".

Save and exit.

4

Go to the start menu in your Windows operating system.

Click Programs - Accessories - Entertainment - volume control. You can also right click the speaker icon in the bottom bar. Select "Options" - properties, and select SHe "microphone". Press OK. See the "Advanced" button closer to the Microphone slider. Click on "coup de Pouce ICM." Click Close. Make sure that you the microphone to the 50% or more.

5

Update the connection parameters if the problem persists or change configuration settings.

Close all prc.ca (including Skype). Find the file C: - documents and settings - Windows - user name application data - Skype - SkypeUsername - config.xml file config.xml. Double-click the file and run it. You can open the file using a text editor such as Notepad or WordPad.

6

Find an entry in the section and another section.

1 and 1. Edit two entries in the config.xml file (1 to 0 to change or vice versa, if the entries in the file are missing, add it). This file is also an option xxx (xxx is a number between 0 and 255). Increase the number 255 (this is the maximum value of the detected). It can be increased if the MCO to 0 is set.

7

If the problem persists, send a ticket.

You can visit the page on the Skype Web site support and report the problem. Learn more about how to submit a bug report.

8

Check the microphone.

If it doesn't work, then find the installation guide to ensure that the microphone is properly installed.

9

Run the sound test.

You can call the robot echo123 service Skype. Go to Skype - tools - options - audio devices, if the problem persists. Select the Mikrofonals it "A""udio in". Test again to echo123.

10

Submit a ticket and report the problem if you are always to use your microphone.

11

Examine the problems of the voice.

If you are unable to hear others, be sure that the reader is connected. Try call echo123.

12

Change the audio settings.

Go to Skype - tools - options - audio devices and select your speakers or headphones as the device "Audio Out". New test with echo123 robot service.

13

Change your Windows settings.

Go to menu - Programs Accessories Entertainment - start volume control. Click "Properties" in the options. Select your speakers or headphones "Mixer devices" and increase the volume of the speaker by 50% or more. The test to echo123.

14

Submit a ticket and report this error if nothing else works.