How do for large test strips for the VoIP capabilities

VoIP or voice over Internet Protocol, is a real-time service that was not possible before the creation of broadband to implement.

Need to ensure that your broadband connection for a VoIP session will serve, to test for four factors. It's called the speed of transmission, jitter, on line, or flow bandwidth and latency and irregularities in the calendar of packets for transmission, or loss of data or packet loss available. You can test your connection without reference to any specific VoIP provider. Difficulty: easy

Instructions

1. 1

   Click the "Start menu", go to "Accessories", select "Run" and type "Cmd" without the quotation marks.

Run the command "ping www.eHow.com 100 n" without quotes. For this command, you can a commercial site.

2

Read the results of ping to find packet loss.

The summary must show a loss of less than 0.5% rate. Ideally, this should be close to zero as possible.

3

Examine the results to find the ping "time or copies round trip in milli-seconds."

The maximum should be less than 150. This is your latency test.

4

Subtract time minimum round trip time maximum round-trip through 2 parts.

This is your total jitter. This number should be less than 2 ms.

5

Test the speed of bandwidth when searching for a site like bandwidth.com speed test.

Different services have different bandwidth requirements. For personal, a line of high quality speed test erhalten(e) at least 90 kbit/s for each number must be the service provideen want.