As Setup VoIP PBX

VoIP or voice over Internet Protocol is a technology of communication which often used by companies for making calls over the Internet.

VoIP is an affordable technology because it uses in the fixed network and can convert voice into a digital signal that is sent over a network. PBX features private branch exchange is a system that manages the exchange between internal or local appellants appeal. VoIP PBX systems distribute communication over IP LANs. Level of difficulty: Medium difficult

Instructions

1. 1

   Buy a communication, the PBX system based on the server, such as publishing Avaya or 3CX fast.

Avaya can your IP-PBX system, 10 minutes to configure phones loudly, how many you connect.Set your PBX system before implementing your VoIP system want because some PBX systems work better with some VoIP providers.

2

Switch connect your CAT-5 cables or wired Ethernet network port.

Connect the other end into the Office, with your VoIP PBX software set.

3

Enter the station name and password.

This may take a few minutes. Now you have configured your IP PBX system.

4

Find a VoIP provider.

It is preferable to find VoIP providers that are supported by the IP PBX software, that you have selected.

5

Buy a VoIP phone adapter.

Close the adapter to an analog or phone.

6

Connect your VoIP phone adapter as instructed by your ISP.

Some cards are connected a modem connection cable between your router and your coordination, erfordern.Herz while others directly into a routerare.

7

Close a phone to phone card and enable your phone card by plugging into a power outlet.

8

Listen for a dial tone.

Which indiqueral'installation is complete.

9

To select a VoIP network, first select the code.

You hear a dial tone after entering the number of prefix. You can click the "#" press for speed dial.