Monday, November 29, 2010

VoIP works

Unfortunately, there are a number of questions about your VoIP service correctly.

Find the cause of your VoIP not implies having to correct physical equipment and your network or your Internet or VoIP service provider. Fortunately, it requires little technical expertise to isolate problems that your cause a poor quality VoIP calls or your failure that a VoIP call to make complete. Your VoIP provider is also a factor. Difficulty: difficult

Instructions

    You reset your network
  1. 1

    Refer it to your Internet service provider and your VoIP provider of service to find out if network outages are in your area.

Your suppliers can sometimes perform maintenance stops on an Internet connection.
  • 2

    Turn your computer.

  • 3

    Press and hold the reset button on your DSL or cable modem.

  • Sometimes this can Internet connection must be updated to a new signal to your VoIP card be sent. Keep the reset button for 30 seconds with a pointed object such as a paper clip or a toothpick. Location of your reset button varies according to the DSL modem and cable, but it is located on the back of the modem.
  • 4

    Press and hold the button Reset your VoIP card (if you have one) for approximately 30 seconds for a lighting indicator sharp object on your router several times Flash is you to inform about the site reset.

  • Physical links
  • 1

    Replace the phone cord from the phone with

  • another telephone cable to your household, and test whether thePhone line is a problem.
  • 2

    Browse the Ethernet cable (looks like a big phone connection) with an Ethernet cable.

  • First move the Ethernet cable from your cable modem or DSL network to your VoIP card. If a service does not have a VoIP adapter, go cable Ethernet connection for your computer to your cable or DSL modem, connectivity check requires.
  • 3

    Disconnect the cable to your cable or DSL modem and your VoIP card.

  • Remove the power cord can some problem with the power to update devices
  • 4

    Add your VoIP software for reliable applications to your firewall software.

  • Sometimes, your firewall may block your VoIP signal. Discover what firewall software that you use, where appropriate, and control panel access. Add your VoIP provider as reliable software. Visit sites like Bandwidth.com tests VoIP leads. It also checks whether a firewall is blocking your phone.

    No comments:

    Post a Comment