As a home during VoIP Cable

Voice over IP is a wonderful thing.

It is easily portable. Rates are lower than the control panel - some even unlimited provider for a monthly fee call. If you put in a studio apartment life, you simply the VOIP device in a convenient location to your phone. But what if you want to live somewhere more, and the VOIP line to each phone ring? the answer is surprisingly simple. Required for mobile handsets, wiring is already in your home. A few simple changes are all that is required for all your phones ring. Level of difficulty: Moderately easy

Instructions

Things you need: VOIP DevicePower drill1/2 "X 10" bit15 listed telephone in outdoor wire.Phillips drill screwdriver or flat ScrewdriverCutting PliersSealant

The line, the

1

Search your phone service outdoor box.

2

In the space of the wall to find a suitable place to locate your broadband modem and your VOIP device.

It should be less than 15 metres away from the phone number box. Taking into account the wiring be making your modem to the broadband to its source.

3

Use the power of the drilling and 1 / 2 "by 10" bit for drilling, encounter a hole in the outer wall as close as possible to the telephone service area.

Lead the telephone wire through the hole.

4

Use the Phillips or screwdriver to open the service.

Inside are a series of four jacks. The top should already have a thread, it is connected. This is the wire, the Earth verbindets hotline to your home wiring.

5

Separate the original wire

, and replace the line that you run through the hole in the wall.WARNING: see warnings if you have DSL.

6

Close, by ensuring

Clamp the newline at the door. If necessary, cutting pliers, delete one square small (1/4 inch by 1/4 inch) to the bottom of the door to space for the new row.

7

Within the House, drag the row until there are no soft remaining.

Fill the hole with the seal within until there are no gaps in the row. Fill the hole sealing outside the House.

8

Connect the phone in the back VOIP line.